How To Install A Toilet Seat With Plastic Screws

How to Replace a Toilet Seat

Posted on Monday fifth August 2022

Installing or replacing a toilet seat is a fairly straightforward job. Whether you're replacing your loo seat because information technology's erstwhile, damaged or you want a new fashion; all you'll demand are some basic tools.

Plumbing equipment a toilet seat is oft one of the easier and quicker DIY jobs in your bathroom, and can be done in a matter of minutes.

Read on for our consummate guide that explains the steps involved in the process...

Why should I supplant my toilet seat?

Toilet seats can be replaced for several reasons. These can include the seat existence broken or cracked, the fixtures may take gone - making it wobble and move around when sat on, or y'all want a new style.

Read more: Update Your Bath on a Budget

If y'all've had a new bathroom fitted, the seat volition likely be done for you, just if not, this will exist the other reason to fit a seat to your loo.

Do all toilet seats fit the same?

No, not all toilet seats fit the aforementioned because toilets come up in a variety of different shapes, so y'all'll need to bank check yours before buying.

Read more: What are the Types of Toilet? Toilet Buying Guide

In that location are iii types of toilet shapes commonly found in UK homes. These are the traditional pointed-nose, D-shape, and round-nose seats.

Replacement toilet seats tin can normally be adjusted to fit older or not-standard toilets; still, the seat must exist supported at the contact points or hinges.

Most toilet seats are an oval shape, although some may be more of a gimmicky foursquare or D-shape. So, it is important to remember this when looking for a replacement in a shop or from the original manufacturer.

Earlier yous buy a seat, there is something essential to practice first…

How to measure a toilet seat

This is, arguably, the most of import function of replacing your toilet seat - you don't want to buy one that doesn't fit.

Are toilet seats a standard size?

No, at that place isn't a standard size for all toilet seats, due to a variety of toilet styles. To detect out the best seat for your toilet, you will need to mensurate your loo. Read below for how to do this.

There are key measurements that you will need, even though most seats are adjustable to fit the near common toilet bowl shapes. The measurements are:

• The distance betwixt the fixing holes - where the screws are. This volition frequently be a standard measurement of 155mm, but it is worth checking
• The width of the toilet bowl at its widest indicate
• The length from the front of the bowl back to the ii seat-fixing holes

Past using these measurements, yous can be certain to purchase the correctly sized toilet seat.

Practice I need to take whatsoever safety steps before I change my toilet seat?

Toilets are an obvious place for harmful germs to abound and can be a source of potential infections, therefore you lot should have precautions before starting.

Wear rubber cleaning gloves at all times when changing a loo seat. Ideally, clean it before removing information technology. Then, once you take taken the seat off, give your whole toilet a thorough cleaning. Use an anti-bacterial spray, which you can pick-up from most shops.

Use an anti-bacterial handwash once you've finished replacing your toilet seat to make sure you've removed any harmful leaner.

What tools will I demand to change a toilet seat?

You will need a set of pliers or adjustable wrench to remove the nuts that secure the seat to the toilet - these will oftentimes exist wingnuts.

Yous may also need a flathead screwdriver to remove any plastic caps that cover the basics. Most of these tools can be found in a garden shed or purchased for fiddling toll at near stores.

Depending on the seat you buy, information technology could come up with a kit to attach it. If y'all are just replacing the fittings, such as the nuts and not the whole seat, you will likely need to buy the parts yourself.

With some newer toilets, they may not come with traditional screw-on seats simply instead a slot-in way, and then it is best to check this earlier ownership a replacement.

How to remove an erstwhile toilet seat

Most toilet seats are attached to the toilet with fittings. These are held together by two bolts usually subconscious by plastic caps at the back of the seat.

You lot may need to hunker or get on the floor to access them properly.

If in that location are plastic caps over the basics, use your flathead screwdriver to remove them. This can be more hard for older seats if they have saturday at that place for some time. Piece of work your mode around the cap, not beingness too rough to damage the toilet itself, to advisedly remove the caps.

One time you've removed the caps, you'll see the top of the screws with wingnuts property your seat in place. These basics are often plastic but may be made from metallic - depending on the age of the seat. Use your pliers to loosen the nuts, and then remove them by hand.

The seat should then lift abroad, simply depending on the brand, you may demand to unscrew it with your screwdriver. If it is potent or besides rusted to elevator away on its own, spray some WD-twoscore to lubricate it and wait for up to 10 minutes before lifting the seat abroad.

If they are still stuck, you lot may demand to use a small hacksaw to saw them off gently.

Some toilet seats vary in how they are held in identify, only most will work in a similar way. If your seat is unlike, take a expect at the fittings and you should exist able to work out how to remove information technology.

Information technology can exist tricky and non the near pleasant chore, but shouldn't take long. Just remember the process for next fourth dimension.

As mentioned above, in one case you lot accept removed your old toilet seat, give the whole toilet a thorough make clean with anti-bacterial spray.

How to put a new toilet seat on

Once yous've removed your old seat, it's time to fit the new one. Y'all will have fittings provided with the new seat, including instructions from the manufacturer on how to assemble them.

Essentially, fitting a new toilet seat the reverse of the removal procedure.

Firstly, line up and attach the new fittings - by slotting the bolts through the toilet fixing holes. Make certain that your seat sits evenly on the perimeter of your toilet basin and centre it. Use your hands or pliers to secure the wingnuts one time you lot're happy with the seat'southward position.

Be careful non to over-tighten them equally yous may want to adjust them one time the new toilet seat is fitted. Furthermore, plastic bolts - if it is the case - volition not need a lot of punishment before they either give way or snap.

Yous may also have prophylactic washers to place between the nut and toilet, to act every bit a cushion.

Y'all will do this on both sides of the seat as there will be two bolts, so two wingnuts to tighten into place in total.

If plastic caps were included with the new toilet seat, snap them into place past pushing them downwards on the bolts, onto the wingnuts.

If you follow these steps, you should be able to supersede your toilet seat chop-chop and hands.

Ollie Lyon

Ollie is a self-trained DIY expert who especially enjoys kitchen and bathroom renovations. In his spare time, Ollie enjoys cycling and hiking.

We beloved seeing your bathroom makeovers and sharing them on our Instagram  page - if y'all've had a Plumbworld renovation, tag us in your photos to be featured!

We would love to know, so why not share your favourite designs on social media with us?

Find usa at:

Facebook  | Twitter  | Instagram | TikTok | Pintrest

Alternatively, sign-up to our newsletter for the latest offers, newest product launches and advice.

Are you planning a new bathroom or kitchen makeover? Shop online with Plumbworld  for guaranteed lowest prices and next day delivery.

Don't forget to check out the rest of our blog  for more than bath and kitchen advice.

Source: https://www.plumbworld.co.uk/blog/how-to-replace-a-toilet-seat

Posted by: potterwizance.blogspot.com

Share this post